Publicité
Congratulations!
You have chosen to purchase a high-quality
product. Familiarise yourself with the product
before using it for the first time.
Read the following assembly
instructions and the safety
information carefully.
Use the product only as described and only
for the given areas of application. Store these
assembly instructions carefully. When passing
the product on to third parties, please also hand
over all accompanying documents.
Scope of delivery (fig. A)
1 x service trolley, unassembled (1-4)
2 x castor with parking brake (5)
2 x castor without parking brake (6)
1 x assembly instructions
Technical data
Dimensions (incl. castors):
RB-13419: approx. 49 x 18.5 x 73.8cm
(l x w x h)
RB-13420: approx. 36 x 22.7 x 73.8cm
(l x w x h)
Maximum load (per shelf):
2kg
Date of manufacture (month/year):
09/2023
Intended use
The product is for use indoors and is not
intended for commercial use.
Safety instructions
Danger to life!
• Never leave children unsupervised with the
packaging material. Risk of suffocation.
Risk of injury!
• The product is not a toy.
• Do not make any modifications to the product!
• Before using the product check for correct
stability.
• Stand the product on an even surface.
• The product may only be used under adult
supervision and not as a toy.
• The product is not for climbing on or playing
with! Make sure that people, especially chil-
dren, do not pull themselves up on the product
or lean against it. The product may tip over.
• Never stand or sit on the product.
• Use the parking brake to safeguard against
the product inadvertently rolling away.
• Check regularly that all plugs are securely
connected!
Risk of trapped fingers!
• Beware of trapping fingers when unfolding or
folding up the product.
Avoiding material damage!
• Always release the parking brake before
trying to move the product.
• Check the product for damage and wear
before each use. The product may be used
only when in good working order and con-
dition!
• Observe the product's maximum load.
Assembly
1. Place the individual parts of the product on an
even and soft surface. (Warning: Assembling
the product on a hard surface can lead to
scratching both the product and the floor!)
2. Assemble all product parts as shown in
figs. B-H.
Setting/releasing the parking
brake
The product has two castors with a parking
brake (5)to prevent it from rolling away. Release
the parking brake when you want to move the
product.
• To set the parking brake push the brake
lever (5a) down.
• Push the brake lever up to release the parking
brake (fig. H).
GB/IE/NI
9
Publicité
