Publicité
is in the same direction as the Direction
Indicator
•
Re-fit the Blade Blade Securing Bolt (6)
Press in the Spindle Lock Button and
tighten using the hex key
•
Ensure the blade is secure before use
SETTING BEVEL ANGLE
•
This saw is equipped with a tilting Base
Plate (8) This allows bevel cuts to be
made
•
Alter the angle of the Base Plate by loos-
ening the Bevel Angle Locking Knob (11)
The Base Plate will now be free to pivot
•
Select the angle required (0 – 45°) using
the Bevel Angle Gauge and retighten the
Bevel Angle Locking Knob
•
Ensure accuracy by checking the angle
between the Blade and the Base Plate
using a suitable protractor
SETTING DEPTH ADJUSTMENT
•
This saw is equipped with a depth adjust-
ment mechanism
•
Alter the depth of the cut by loosening the
Depth Locking Knob The Base Plate is
now free to adjust to the required depth
•
Adjust the Base Plate to the required
depth using the Depth Scale or a ruler and
retighten the Depth Locking Knob
•
When set correctly, the blade teeth should
project approximately 3mm from the
underside of the material being cut
MAINTENANCE AND CLEANING
WARNING: Always disconnect from the mains
power supply, before carrying out any mainte-
nance/ cleaning of the charger Remove the
battery before carrying out any maintenance/
cleaning of the tool
Cleaning
•
Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air
•
We recommend that you clean your elec-
tric power tool immediately after each use
•
Clean the electric power tool regularly with
a damp cloth and somewhat soft soap
Do not use any cleaning or solvent materials;
these can attack the device's plastic compo-
nents Make sure that no water can get inside
the electric power tool
Maintenance
There are no inner parts of the tool which need
maintenance
TECHNICAL DATA
No load speed
Blade size
Blade bore
Max depth of cut
Weight
Sound Pressure Level L
Uncertainty K
pA
Sound Power Level L
WA
Uncertainty K
WA
Hand Arm Vibration (No Load)
Uncertainty K
English
1450 min
Ø 85 mm
Ø 15 mm
0°: 26mm / 45°: 17mm
1 11 kg
77 1 dB(A)
pA
3 dB
88 1 dB(A)
3 dB
3 368 m/s
1 5m/s
-1
2
2
9
Publicité
