Publicité
DEAR CUSTOMERS
Please familiarize yourself with the proper
usage of the device by reading and follow-
ing each chapter of this manual, in the order
presented. Keep these operating instruc-
tions for further reference.
Please read all safety instructions!
This manual contains important informa-
tion on operating and handling the device.
Keep these operating instructions for fur-
ther reference. Please pass it on along with
the unit if it is handed over to a third party.
Battery and charger not included!
The Fixxpack batteries and chargers are
available online and in participating stores.
EXPLANATION OF THE SYMBOLS
Warning! To reduce the risk of injury,
the user must read the instruction
manual.
Denotes risk of personal injury, loss
of life or damage to the tool in case
of non-observance of the
instructions in this manual.
Always wear hearing protection. The
effects of noise can cause hearing
loss.
Wear safety glasses. When working
with electric power tools, sparks,
splinters, chips and dust particles
may be generated and these can
cause loss of sight.
CE stands for "Conformité
Européenne", which means "In
accordance with EU Regulations".
With the CE marking, the
manufacturer confirms that this
Electric tool complies with the
applicable European directives.
UKCA stands for: "UK Conformity
Assessment". This means
"Compliant with UK regulations".
With the UKCA mark manufacturer
confirms that this unit complies with
the applicable UK regulations.
Do not dispose of electric power
tools with domestic refuse.
SAFETY INSTRUCTIONS FOR CIRCULAR
SAWS
Cutting procedures
a.
DANGER: Keep hands away
from cutting area and the
blade. Keep your second hand
on auxiliary handle, or motor housing. If
both hands are holding the saw, they
cannot be cut by the blade
b.
Do not reach underneath the work-
piece. The guard cannot protect you from
the blade below the workpiece
c.
Adjust the cutting depth to the thick-
ness of the workpiece. Less than a full
tooth of the blade teeth should be visible
below the workpiece
d. Never hold piece being cut in your
hands or across your leg. Secure the
workpiece to a stable platform It is impor-
tant to support the work properly to mini-
mise body exposure, blade binding, or
loss of control
e.
Hold the power tool by insulated grip-
ping surfaces only, when performing an
operation where the cutting tool may
contact hidden wiring or its own cord.
Contact with a "live" wire will also make
exposed metal parts of the power tool
"live" and could give the operator an elec-
tric shock
f.
When ripping, always use a rip fence or
straight edge guide. This improves the
accuracy of cut and reduces the chance
of blade binding
g.
Always use blades with correct size
and shape (diamond versus round) of
arbour holes. Blades that do not match
the mounting hardware of the saw will run
eccentrically, causing loss of control
h.
Never use damaged or incorrect blade
washers or bolts. The blade washers and
bolt were specially designed for your saw,
for optimum performance and safety of
operation
English
5
Publicité
