Télécharger Imprimer la page

IKEA VINTROSA Mode D'emploi page 11

Publicité

Les langues disponibles

Les langues disponibles

ENGLISH
Status window on the front door
Wash
Dry
Clean
Operating instructions
Before first use
1. Fill the rinse aid dispenser.
2. Insert the mains plug into the socket. The power
supply is 120V/60 Hz.
3. Turn on the faucet. Make sure that the water
supply is turned on to full pressure.
4. Close the dishwasher door firmly.
5. Start a programme to remove any processing
residuals that can still be inside the appliance. Do
not use detergent and do not load the baskets.
Filling the rinse aid dispenser
Your dishwasher is designed to use a liquid rinse aid
which is automatically released during the hot rinse
phase. The rinse aid helps to dry the dishes without
streaks and stains. For best drying performance,
always use rinse aid.
Do not use a solid or bar-type rinse aid. Under normal
conditions, the rinse aid will last approximately one
month. Try to keep the dispenser full, but do not over
fill it.
1. WASH
2. DRY
3. CLEAN
1. Find the rinse aid
dispenser on the
inside of the door.
2. Turn rinse aid
dispenser cap
counterclockwise and
lift it out.
When the dishwasher is in a wash or rinse stage of a
cycle, the WASH light is illuminated.
When the dishwasher is in a drying stage of a cycle, the
DRY light is illuminated.
After the dishwasher has completed all stages of a cycle,
the CLEAN light is illuminated.
If the door is opened when the CLEAN light is illuminated,
the light will turn off after 60 seconds.
Note: Wipe up any spills with a damp cloth.
The dispenser holds enough rinse aid for 35 to 140
washes, depending on the dial setting.
The rinse aid empty notification
When rinse aid container is empty, the rinse aid
indicator
lights up notifying you to refill rinse aid.
The rinse aid level
You can adjust the amount of the rinse aid released
during the rinse operation. The rinse aid dosage level
is adjustable from 1 to 6 (minimum to maximum).
Factory setting: level 5.
3. Fill the container
with rinse aid to the
indicated fill level. Be
careful not to overfill.
4. Replace the cap by
turning clockwise.
11

Publicité

loading