Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
Adding a dish after the appliance is started
To add items after the wash cycle starts:
1. Open the door slightly and wait a few seconds until
wash action stops before completely opening.
2. Add the item.
3. Press START/Reset on the control panel and close
the door within 4 seconds. The cycle automatically
resumes.
WARNING!
the door slowly and wait for the spray arms and
wash action to stop completely. Hot water may
splash out of dishwasher. Failure to do so may
result in injury.
At the end of the programme
1. The appliance will stop automatically once the
programme has completed.
2. Turn off the faucet.
When the programme is completed the display shows
00.
Hints and tips
General
The following hints will ensure optimal cleaning and
drying results in daily use and also help to protect the
environment.
•
Remove larger residues of food from the dishes
into the waste bin.
•
Do not pre-rinse dishes by hand. When needed,
use the prewash programme (if available) or select
a programme with a prewash phase.
•
When loading the appliance, make sure that the
dishes can be completely reached and washed by
the water released from the spray arm nozzles.
Make sure that items do not touch or cover each
other.
•
You can use dishwasher detergent and rinse aid
separately or you can use the multi- tablets (e.g.
''3 in 1'', ''4 in 1'', ''All in 1''). Follow the instructions
written on the packaging.
•
Select the programme according to the type of
load and degree of soil. With the Energy saver
programme you have the most efficient use of
water and energy consumption for crockery and
cutlery with normal soil.
TO AVOID BURN INJURY: Open
Unloading the baskets
For better drying results keep the appliance
door ajar for some minutes before you remove
the dishes.
1. Let the dishes cool down before you remove them
from the appliance. Hot dishes are easily damaged.
2. First remove items from the lower basket then the
upper basket.
At the end of the program water can still remain
on the sides and on the door of the appliance.
Child lock
You can lock the control panel buttons to prevent
children from accidently changing the dishwasher
cycle or starting the dishwasher.
To activate or cancel this function, press the
buttons simultaneously. When activated, the
indicator light
turns on.
Activate and deactivate the acoustic signal
Press and hold
and
deactivate the acoustic signal.
Using rinse aid and detergent
•
Only use rinse aid and detergent for dishwasher.
Other products can cause damage to the
appliance.
•
In areas with hard and very hard water we
recommend to use plain dishwasher detergent
(powder, gel, tablets containing no additional
agents) and rinse aid separately for optimal
cleaning and drying results.
•
At least once a month run the appliance with
the use of appliance cleaner which is particularly
suitable for this purpose.
•
Detergent tablets do not fully dissolve with short
programmes. To prevent detergent residues on
the tableware, we recommend that you use the
tablets with long programmes.
•
Do not use more than the correct quantity of
detergent. Refer to the instructions on the
detergent packaging.
for 3 second to activate or
16
and
Publicité
