IKEA VINTROSA Mode D'emploi page 10

ENGLISH
Symbol Functions
Child Lock
Vortex Wash
Heating Dry
Sanitize
Hi-Temp Wash
Notes:
•
Certified residential dishwashers are not intended for licensed food establishments.
•
The sanitize cycle is NSF certified.
Controls and indicators
Symbol Name
Delay
Start/Reset
Rinse Aid
Sanitized
Clean
Display
Shows the remaining hours and
minutes of the current cycle, delay
hours remaining, and error codes
(see "Troubleshooting" > "Error
codes" section).
Press and simultaneously to activate or cancel the Child Lock
function.
Use when you want to wash pots and pans, durable serving bowls, and
other large, heavily soiled, hard to clean dishes. Place the dishes face down
in the lower rack directly above the vortex wash arm in the back left corner
of your dishwasher. This function is not available for the Rinse Only
Use to heat-dry your dishes. This function is not available for the Rinse Only
cycle.
Use to sanitize your dishes and glassware. Maintains the water temperature
at 158°F (70°C) max., and is available with the Pots&Pans
, and Energy Saver
Use to maintain the water temperature at 140°F (60°C) max. This option is
available with the Pots&Pans
Press to delay the start of the selected wash cycle.
Press to start or cancel a programme.
Turns on when you need to add rinse aid.
Turns on after the cycle is finished with the sanitize function.
Turns off in 1 minute after the door is opened, any button is pressed or the
door is closed again.
Turns on after a full cycle is finished and the door is opened.
Turns off in 1 minute after the door is opened, any button is pressed or the
door is closed again.
Note: If the remaining time on the display suddenly increases or
decreases by several minutes, this means that the Smart Sensor is
checking the level of soiling or that the water needs to be heated to
reach the required temperature.
Description
.
, Normal Wash
Description
cycle.
, Normal Wash
.
10