Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION
General
Gas connection
Electrical connection
This appliance should only be connected up by a registered installer!
The gas and electrical connection must comply with national and local
regulations.
Warning!
The type of gas and the country for which the appliance has been
designed are indicated on the data plate.
This is a class 3 appliance.
• We recommend that the hob be connected by means of a fixed
pipe. Connection using a specially designed safety hose is also
permitted.
• Behind an oven use must be made of a pipe made entirely out of
metal.
Warning!
• A safety hose may not be bent and must not come into contact
with moving parts of kitchen units.
• In all cases the connection tap for the appliance must be positioned
such that it is easily accessible.
Before using the appliance for the first time check the connections
using water and washing-up liquid to ensure that there are no gas
leaks.
1.1 VA - 230-240 V~ - 50/60 Hz
• Wall socket and plug must be accessible at all times.
• Electrical leads and cables should not be allowed to touch the hob.
• If you want to make a fixed connection, ensure that a multi-pole
switch with a distance between contacts of 3 mm is installed in the
supply cable.
• Do not use an adapter or an extension lead to connect the
device to the electrical mains. Safe use of the device cannot be
guaranteed with these accessories.
EN 19
Publicité
