Publicité
Les langues disponibles
Les langues disponibles
OPERATION WITH TOUCH CONTROLS
Burner switch-off time (GKT564/GKT595)
If the release procedure is repeated 5 times in a row during a
15 minute time span, the device will indicate Flt06 and will accept
no further request for release for another 15 minutes.
Switching off one burner
Touch the + and the - button simultaneously for 2 seconds of the
burner you want to switch off or use the - button to set the burner to 0.
The burner switches off and above the touch control a blinking 'H' will
remain visible for some minutes to indicate that the burner is still hot.
Switching off all burners at the same time
Touch the On/Off button.
The hob is now switched off. If a burner is still hot, a blinking 'H' will remain
visible in the display of the corresponding burner for some minutes.
It is possible to set a switch-off time for every burner. The burner will
then switch off automatically when the set time has passed. You can
only set the switch-off time if the burner is ignited.
• The countdown starts as soon as the programming of the switch-off
time for a burner has been confirmed. If you do not confirm the set
time, the countdown will start after several seconds.
• The set switch-off time can be seen in the timer display for each
burner (after the right burner has been selected).
• If the time has elapsed, the burner switches off and you will hear a
beep several times during 30 seconds.
Programming the burner switch-off time
• Switch on the hob, ignite a burner and set the power.
• Touch the timer button.
An indicator above the timer button will start blinking to indicate
that the burner is currently selected for programming the switch-
off time. With the timer button you can select each burner that has
been ignited. In the display 't0.00' appears to indicate that there has
not been set a time yet for the selected burner.
• Touch the + button of the timer to set the switch-off time for the
selected burner (steps of 1 minute).
• Touch the timer button again to confirm the setting.
Above the timer button the indicator lights of burners that are linked
to a timer will remain illuminated.
EN 11
Publicité
