FLORABEST 297536 Traduction Du Mode D'emploi Original page 167

2. There are two mounting
holes on the lower handle's
fixing bracket (27). Fold the
lower handle backwards
until the notches on the
handle are aligned with the
desired hole. Lock the lower
handle (5) in position by
fixing it with the two quick-
release clamps (34). To do
so, press the quick-release
clamp towards the handle's
tube.
3. Assemble the upper handle
(1) onto the lower handle
(5) by quick-release clamps
(34).
Choose the upper hole in
the lower handle (5) for
a slightly longer overall
length.
4. Fasten the bowden cable (6)
to the lower handle (5) by
cable clip-1 (7).
5. Fasten the electric starter
cable (24) to the lower
handle (5) and upper
handle (1) by cable clip-2
(31) .
All manuals and user guides at all-guides.com
Assembling the grass
collection box
(Fig. A, E)
1. Assemble the grass
collection box tongue
(41) on the right grass
collection box housing
(42) and fix it by screw
from outside using
supplied screw driver
(38).
2. Put the left collection box
housing (43) together
with the right one and use
the screw to connect.
3. Insert the grass collection
box upper handle (32)
into grass collection box
cover (44) and use screw
to fix.
4. Put the grass collection
box cover (44) on the
grass collection box
housing and connect both
sides by clicking the clips,
and tighten all screws to
fix.
GB IE NI
167