FLORABEST 297536 Traduction Du Mode D'emploi Original page 163

All manuals and user guides at all-guides.com
manufacturer's insturctions.
Ensure sufficient space
between feet and the
cutting tool. Risk of injury.
• When starting or activating
the engine, do not tip
the equipment unless the
equipment has to be lifted
for this procedure. In this
case, tip the equipment
only as far as is absolutely
necessary and lift only the
side that is away from the
user.
• Do not start the engine
when standing in front of
the ejection channel.
• Switch on the engine
in accordance with the
instructions and only if your
feet are a safe distance
away from the cutting tools.
• Do not place hands or
feet under rotating parts.
Always keep away from the
ejection opening. A moment
of carelessness when using
the equipment may result in
serious injury.
• Do not leave or carry the
equipment when the engine
is running.
• Switch off the engine,
remove the electric starter
battery, take out the spark
plug cable and ensure
that all moving parts are
still:
- Before releasing
blockages or removing
obstructions in the
ejection channel;
- Before checking,
cleaning or working
on the equipment;
- If a foreign body is
struck. Look for damage
to the equipment and
carry out the necessary
repairs before restarting
and working with the
equipment;
- If the equipment starts
to vibrate unusually
strongly, an immediate
check is required.
• Switch off the engine,
remove the electric starter
battery take out the spark
plug cable and ensure
that all moving parts are
still:
- When leaving the
equipment;
GB IE NI
163