Publicité
Les langues disponibles
Les langues disponibles
Charging the battery (Fig. C)
1. Connect the USB connector (2a) of the USB
cable (2) with the rechargeable battery
connector (1d) of the train (1).
2. Plug the USB cable connector (2b) into the
USB port of a powered-on computer or a
loading station with USB port.
Inserting the batteries
(Fig. D)/(Fig. F)
WARNING! Observe the following
instructions to avoid mechanical and
electrical damage.
Before using the product for the first time, insert
the batteries (18)/(19) provided.
1. Use a suitable screwdriver (not included in
the package contents) to loosen the screw
(3a)/(4b)/(7a) of the battery compartment
cover on the underside of the train signal
(3), the tunnel (4), and the sound track (7),
respectively.
Note: make sure that the screw is kept safely
away from children and does not get lost.
2. Remove the battery compartment cover
(3b)/(4c)/(7b) and carefully insert the
respective batteries (18)/(19) into the
battery compartment (3c)/(4d)/(7c). The
batteries must be inserted fully into the battery
compartment.
Note: check the plus/minus poles of the
batteries and insert them correctly.
3. Screw the respective battery compartment
cover back onto the underside of the train
signal (3), the tunnel (4) and the sound track
(7).
Replacing batteries
WARNING! Observe the following
instructions to avoid mechanical and
electrical damage.
When the batteries are flat, replace them as
described in the insertion instructions.
Remove the batteries from the product before
inserting new ones.
14
GB/IE
Assembly
To assemble the product, follow the individual
steps as shown in Fig. E and Figs. G–J.
Assembly variants
Assembly variants can be found in the enclosed
overview.
Note: assembly variants with multiple,
consecutive curved parts can potentially derail
the vehicles!
Clean the tracks with a damp cloth before using
them for the first time!
Use
Activating and deactivating the
train (Fig. B)
1. Press the front button (1a) to drive forwards.
2. Press the middle button (1b) to stop the train.
3. Press the back button (1c) to drive backwards.
Warning! The train is not intended to drive
backwards on bridges or inclines.
Activating and deactivating the
train signal (Fig. K)
Press the button (3d) to activate or deactivate
the light on the train signal (3).
Activating the tunnel (Fig. L)
The light in the tunnel (4) activates when the train
(1) drives through the tunnel.
Storage, cleaning
When not in use, always store the product
dry, clean, without batteries and at room
temperature.
Only clean the product with a damp cloth and
wipe dry afterwards.
Warning: the tracks should be cleaned before
being used for the first time!
IMPORTANT! Never clean the product with
harsh cleaning agents.
Publicité
