Seca 284 Mode D'emploi Et Garantie page 95

Switch between BMI
and BFR (body)
Set display backlighting
3. Select the setting you require
– On
– Off
4. Confirm your selection.
You will leave the menu automatically.
5 minutes after every measurement, patient data,
height and BMI/BFR are deleted. "----" is displayed
instead.
The gender symbol goes out.
You can select whether the measuring station
calculates Body Mass Index (BMI) or Body Fat Rate
(BFR). The current setting is permanently displayed in
the multifunctional display.
The calculation is performed automatically as soon as a
height is transmitted wirelessly by the head slide or
entered manually.
1. Select the item "body" from the menu.
2. Confirm the selection.
The current setting is displayed.
3. Press arrow key send or print to switch between
BMI and BFR.
4. Confirm your selection.
You will leave the menu automatically.
The modified setting is permanently displayed in the
multifunctional display.
You can change the duration and brightness of the
display backlighting.
(LCd)
1. Select the item "LCd" from the menu.
2. Confirm the selection.
3. Select a menu item
– dUr: Duration
– bri: Brightness
4. Confirm your selection.
The current setting is displayed.
English
Operate scales • 95