Publicité
Les langues disponibles
Les langues disponibles
Continuous display of
measured result (Hold)
4. Ask the patient to step under the head slide.
– Back towards the head slide
– Heels against the heel stop
– Back and head straight
5. Hold down the brake button and push the head
slide down until it is in contact with the patient's
head.
6. Pull the Frankfurt measure out of the head slide.
7. Align the patient's Frankfurt horizontal with the
matching one of the three Lines of the Frankfurt
measure.
8. Keep the brake button pressed and correct the
position of the head slide.
9. Read off the height on the head slide display.
10. Press the Enter key (send/print) to transmit the
height to receivers from the
system.
– Press key briefly: send measured results to all
receive-ready devices
– Hold down: print measured results
If you activate the HOLD function, the measured value
continues to be displayed after the measurement is
complete. This allows you to move the head slide
before noting down the measured value.
1. Briefly press the arrow key (hold/zero), after you
have positioned the head slide.
The message "HOLD" is displayed.
The head slide can now be moved without the
measured value displayed changing.
2. To disable the HOLD function, press the arrow key
(hold/zero).
The "HOLD" message is no longer displayed.
English
seca 360° wireless
Operate head slide • 101
Publicité
