Seca 284 Mode D'emploi Et Garantie page 112

Activate/Deactivate
module (system)
Select print option
112 •
The device is supplied with the wireless module
activated. Power consumption is increased with the
wireless
wireless module activated. You can disable the wireless
module if you do not wish to use the wireless data
transmission option.
1. Switch the device on.
2. Select the "SYS" menu item from the "rf" submenu.
3. Confirm the selection.
The current setting is displayed.
4. Select the setting you require
5. Confirm the selection.
You will leave the menu automatically.
You can configure the measuring station so that
(APrt) measured results are automatically printed out on a
wireless printer logged on to the wireless group.
1. Switch on the head slide and the multifunctional
display.
2. Select the "APrt" menu item from the "rf" submenu
and confirm your selection.
3. Depending on the required print result, select the
appropriate setting for head slide and
multifunctional display.
Height
Weight
Height, weight and
BMI/BFR
No automatic
printing
4. Confirm your selection.
You will leave the menu automatically.
– On
– Off
NOTE
This function is only available if the "learn"
function has been used to integrate a
seca wireless printer in the wireless group.
Print result
APrt head
multifunctional
slide
on off
off MA
off HI_MA
off off
APrt
display