Publicité
Les langues disponibles
Les langues disponibles
Enter patient data
(input)
3. Ask the patient to step onto the scales.
4. Press the hold key.
The display flashes until a stable weight is
measured. The weight value is then displayed
continuously. The
message are displayed.
5. To disable the HOLD function, press the hold key.
The
-symbol and the "HOLD" message are no
longer displayed.
NOTE
If the Autohold function is activated, the weight
value is automatically displayed continuously as
soon as a stable measured result is achieved
(see "Activate Autohold function (AHold)" on
page 97).
You can enter the patient data age, gender and
physical activity level (PAL) directly on the
multifunctional display. The patient data is also sent
when you transmit the measured results to a wireless
printer from the
seca 360° wireless
The wireless printer analyses the measured results on
the basis of the patient data. The measured results and
analysis are printed out, depending on the
configuration of the wireless printer. This makes
diagnosis much easier.
NOTE
Details of the wireless printer's configuration are
given in this user manual.
1. Press the Start key
display.
2. Press the Enter key (input).
The first time it is called after the device is started,
the "PAL" (Physical Activity Level) menu item
appears in the display.
If called again while the device is switched on, the
last selected menu item appears in the display.
symbol and the "HOLD"
system.
of the multifunctional
Operate scales • 87
English
Publicité
