Explanation Of The Symbols On The Data Plate - Miele professional HM 21-100 Mode D'emploi

Explanation of symbols on data plate
1 Machine type
2 Machine number/(year of manufacture*)
3 Voltage/Frequency
4 Control fusing
5 Drive motor
6 Plate diameter/Plate qty. *
7 Drum data*
8 Drum diameter/Drum depth *
9 Spin speeds *
10 Drum volume/Laundry dry weight*
11 Kinetic Energy *
12 Top running time *
13 Braking time *
14 Heating
15 Electric heating
16 Fusing (to be installed on site)
17 Steam heating indirect*
18 Steam heating direct *
19 Gas heating*
20 Commissioning date
21 Water registrationDVGW- test cert (Water)*
22 Field for CE test symbol...(Product ID-No./
Gas)*
*
) does not apply to this machine.
After Sales Service
In the event of any faults please contact your
Dealer or the nearest Service Department.
When contacting the Service Department,
please quote the Model and Serial number
(Fabr.-N°) of your machine, both of which are
shown on the data plate.
When ordering spare parts from the Spare
Parts Department please quote the Model
and Serial number (Fabr.-N°) of your machine.
Only use Spare Parts approved by the
manufacturer.
Noise emission
HM 21-100
registered on the "A" scale.
(measured in Germany in accordance with
DIN (IEC) 45 635, machine noise regulations
3. GSGV p 1. 1.a)
23
- 67.6 dB
M.-Nr. 3658530 - GB -