Temperature Selection; Foot Pedal Switch - Miele professional HM 21-100 Mode D'emploi

Operation

Temperature selection

Select the temperature according to fabric
type and wash care label on the laundry.
Start by ironing those pieces which require
the lowest temperature.
Turn the temperature selector to the re-
quired setting.
On the temperature selector the individual
temperature range is distinguished by dot
symbols, which are in accordance with inter-
national clothing care symbols for ironing.
Fabric Dot symbol
Perlon /
artificial silk
Silk / Wool
Cotton / Linen
The heating up time required for linen is
about 5 - 8 minutes. Once the required tem-
perature has been reached the roller should
be warmed up by turning it a few times before
feeding the laundry through.

Foot pedal switch

The ironing process is controlled by a foot
pedal switch which has three operating
positions:
To iron:
Press the foot pedal switch right down to
the floor.
To Press:
First press the foot pedal right down to the
floor, then lift the foot up a little, so that the
heater plate remains in position but the
roller does not rotate.
Temperature
To raise the heater plate:
level
TAKE FOOT OFF PEDAL
low
Temperature
medium
Temperature
high
Temperature
19
1 Raising the heater plate (at rest)
2 Pressing
3 Ironing
M.-Nr. 3658530 - GB -