Prevention Measures For User; Personal Safety Measures; Compliance With Safety Measures And Warnings - Kunzle & Tasin Bona FlexiSand 1.9 Manuel D'utilisation

Prevention Measures for Users

Personal safety measures

Sawdust can spread through the air and be inhaled when
using the sanding machine. Always wear a dust mask when
using the sanding equipment.
The eyes and/or body may su er injury if personal safety
clothing is not used. Always wear safety goggles, protective
clothing and a dust mask during sanding operations.

Compliance with safety measures and warnings

Using the machine when not fully assembled may cause
injury or damage to people or objects. DO NOT use the
machine when it is not fully assembled. Keep all fittings tightly
closed. Maintain machine settings in accordance with the
specifications.
Using the machine without the safety guards and covers in
position may cause injury or damage. Always ensure that all
safety guards and covers are in position and secured well.
The sanding machine may create an explosive environment.
Cigarettes, cigars, pipes, lighters, pilot flames, or any other
source of fire may create an explosion if lit during sanding
operations. No sources of fire should be kept near the work
area.
Poorly ventilated work areas may create an explosive
environment when some combustible materials are present
in the atmosphere, such as solvents, thinners, alcohol, fuel,
some paints, wood dust or other combustible materials.
Floor sanding may cause various materials and fumes to
ignite. Read the manufacturer's instructions for each chemical
product used and establish its combustibility. Always keep the
work area well-ventilated.
Lengthy exposure to noise levels during sanding operations
may damage the hearing. Always use ear protectors during
sanding operations.
Never become distracted during sanding operations, check
what is happening continually. Use common sense. DO NOT
use the machine when tired.
Striking nails when sanding may generate an explosion or fire.
Always ensure all nails are sunk before sanding surfaces.
Serious damage may occur if the power supply circuit trips
repeatedly or is undersized. Have the fuses, safety circuit and
power supply line checked by an authorized electrician.
Performing maintenance and/or repairing the machine when
it is not fully disconnected from the power supply may cause
death due to electrocution. Disconnect the power supply
before carrying out any maintenance and/or repair work.
Bona FlexiSand 1.9 Manual
13
EN