Cable, Exstensions And Plugs - Kunzle & Tasin Bona FlexiSand 1.9 Manuel D'utilisation

Commencing Operation (Cont.)
Instructions for electrical connection (Cont.)
Tampering with the grounding plug in any way may result in
death from electrocution. DO NOT cut, remove or break the
grounding plug. If the socket does not match the plug consult a
qualified electrician.
Cables, extensions and plugs
Only use approved cables. The maximum
recommended cable length is 10m; for greater lengths
use cables with a larger cross-section.
MACHINE WITH 230V~50Hz MOTOR 1.9kW
For machines with a 230V~50Hz motor (EU), a HO5VV-F-
3x2,.5mm HAR-approved power supply cable must be used
2
along with an approved SCHUKO 2P+E 16A 200÷250V plug.
12
If the machine is used with a damaged plug or power supply
cable, death may occur from electrocution. If cables or plugs
are worn or damaged in any way, have them replaced by the
manufacturer or certified machine repair center in order to
prevent risks to safety.
Using the machine with unsuitable and/or excessively long
cables may cause injury or damage to people or objects.
The machine must never be moved using its cable and the
cable must never be pulled when disconnecting from the
socket.
Keep the cable away from sources of heat, oil and sharp
edges.
Bona FlexiSand 1.9 Manual