Fluid EU-ROW 3 Manuel D'utilisation page 16

Monitor and APP Connectivity
..........................................................................................................................................................
Bluetooth Heart Rate Pairing
NOTE: Heart Rate Chest Strap and Touch Heart Rate Handle is sold separately.
Heart Rate
Detaching the Rower Belt
..........................................................................................................................................................
1. To detach Belt, simply pull beyond the range of the normal
rowing stroke until the Belt detaches from the Belt bungee
pulley.
Tip: You'll hear the Velcro separating just before the Belt
detaches.
2. Unhook the Bungee Shock Cord from the Rear Brace. Then, push out the Inner Clip from the
Bungee Hook.Pull the Bungee through the Inner Clip until free. This will allow for the Bungee
Shock Cord to be threaded completely out of the Main Frame and up to the Belt Bungee Pulley
where it will be re-attached once the Rower Belt is in the proper position.
1. Download the "Fluid Connect" App on the [App store] or [Google Play].
2. While the Monitor is ON, the Bluetooth will start scanning to link to the
Phone/Pad.
3. Turn on the FLUID CONNECT app in you phone.
4. Push any work out icon, the APP will search the available Monitor near
by.
5. Choose the Monitor that you wish to link.
6. After the Monitor link to the APP, the display of the Monitor will only
show BT on the screen.
The Monitor will automatically pair with the nearest Bluetooth heart rate
device.
When pairing is complete, the Monitor will begin to display the heart rate.
14
Inner Clip
Bungee Hook
2.
1.