Publicité
Les langues disponibles
Les langues disponibles
Reset function
Reset key function, press reset key
will be reset whole product, need setup again.
Troubleshooting
The product contains delicate electronic components. Thus radio
transmitting equipment in the immediate vicinity may interfere with the
product. If the display shows interference, move such objects away
from the product.
Electrostatic discharges can lead to malfunctions.
In cases of the product failing to work, remove the batteries for a short
while and then replace them.
Obstacles, e.g. concrete walls, may make the reception susceptible to
interference. In this event change the location. Please note, the outdoor
sensor should always be set up within a range of max. 100 metres
(open area) of the main station. The specified range is the open area
range, meaning there should be no obstructions between the outdoor
sensor and the base. "Visual contact" between the outdoor sensor
and the base will often improve transmission.
Cold (outdoor temperatures below 0 °C) may also negatively impact
battery performance of the outdoor sensor, thus wireless transmission.
Another factor which may interfere with reception is drained or weak
batteries in the outdoor sensor. Replace these with fresh batteries.
If the product is not working properly, briefly remove and reinsert the
batteries.
28 GB/IE/NI
back of the main station
11
Publicité
