Publicité
Les langues disponibles
Les langues disponibles
Both alarm symbols will appear:
button a fourth time will deactivate both alarm 1 and alarm 2.
Switching off the alarm
The alarm will sound at the set time and the backlight will switch
on. When not switched off, the alarm will sound for 2 minutes
before stopping automatically.
Press the SNOOZE-/LIGHT field
display will flash
activated: the alarm will sound again after 5 minutes.
Press any button on the keypad to actually shut off the alarm.
Accessing stored data
Maximum temperatures
Press the MEM button
show
and
22
23
ity. The respective maximum indoor and outdoor value will be shown.
Press the MEM button twice and MIN will appear next to the temper-
ature, and the respective lowest indoor and outdoor value will be shown.
After 5 seconds the current values will again be displayed.
TIP: Min / Max Temperature are measured by all time since start
(after batteries inserted / power supply connected). To erase the
stored Min / Max Temperature, hold the MEM button for approx.
3 seconds.
Barometric pressure history
Repeatedly briefly pressing the SET-/HISTORY button
the barometric pressure for the past 12 hours. The barometric pressure
field
next to the display of the barometric pressure the history
25
indicates how many hours ago the barometric pressure being displayed
was current.
26 GB/IE/NI
, indicating the snooze function has been
nagain and both temperature fields will
13
next to the temperature, and MAX next to the humid-
. Pressing the DOWN- /
to interrupt the alarm. The clock
2
will display
7
Publicité
