EUROM 336009 Manuel D'utilisation page 33

Operating

Check that the wall socket you want to use supplies the voltage shown on the
appliance's type plate (220-240V~50Hz) and that is is earthed. Then insert the
plug in the socket and the appliance will start to work. To switch the appliance
off, remove the plug from the wall socket.

The party-tent heater is not equipped with a thermostat and will continue to emit
heat for as long as it is switched on. For that reason, don't leave persons, who
are not able to leave their position on their own, alone with a functioning
Partytent heater! Never leave a functioning party-tent heater unsupervised!
Maintenance and cleaning
Always remove the plug from the socket before carrying out maintenance or
cleaning activities and leave to cool before performing maintenance or cleaning.
Clean the exterior of the party-tent heater with a soft, damp cloth and, if
necessary, a little cleaning agent. Never use aggressive or abrasive products and
ensure that water never penetrates the device itself!
You will not usually need to clean the reflective screen or the carbon lamps. If
necessary, you could use a vacuum cleaner to suck dirt through the grille. If this is
inadequate, engage a professional. Never open up the device yourself!
Removal
CE-statement
See page 94.
In the EU this symbol indicates that this product may not be
disposed of as ordinary household waste. Old equipment contains
valuable materials, suitable for recycling. These materials should
be made suitable for reuse in order to prevent any adverse effects
to health and the environment caused by unregulated waste
collection. Therefore, please make sure that you bring old
equipment to a designated collection point. Alternatively, contact
the original supplier, who can make sure that as many of the
components as possible can be recycled.
33