Blomberg BGR 24100SS Manuel D'utilisation page 15

WALL
to take this precaution can resuit in
tipping of the range. Personai injury
might resuit from spiiied hot iiquids or
from the range itseif.
Anti-Tip stability device
installation instructions
1. The anti-tip device has to be attached
to the fioori as shown in Figure 3.
The dimension for the bracket iocation
from the floor is to be determined after
the appiiance feet have been adjusted to
the proper instaiiation height shown in the
instaiiation instructions and the appiiance
has been ieveied.
2. Locate the anti-tip device on the waii at
the measured dimension from where the
ieft side of the appiiance (facing range) is
to be iocated.
3. Siide range into piace making sure the
anti-tip device to be faced the anti-tip
hoie on the cooktop and screwed.
Fasten Bracket (Floor Mounting only)
A
Tip Over Hazard
A child or adult can tip the range and
be killed. Connect anti-tip bracket to
rear range foot. Reconnect the anti-tip
bracket, if the range is moved. Failure
to follow these instructions can result in
15