Sanitas SBC 53 Mode D'emploi page 33

To clear individual measurements from the relevant user
memory, you must first select a user memory.
• Start the retrieval of the individual measured values.
• Press and hold the memory button M1 or M2 for 5
seconds (depending on the user memory you are in).
• The selected value is deleted. The device briefly dis-
plays CL 00.
• If you would like to delete other values, repeat the pro-
cess described above.
You can switch off the device at any time by pressing the
START/STOP button.
®
Transfer via Bluetooth
It is also possible to transfer the measured values saved on the
device to your smartphone using Bluetooth
You will need the HealthCoach app for this. The app is availa-
ble from the App Store.
Proceed as follows to transfer values:
®
If Bluetooth is activated in the settings menu, the data is
transferred automatically after the measurement. The
appears in the top left of the display (see chapter 4 „Preparing
the measurement").
Smart
®
Smart.
symbol
33
Step 1: SBC 53
®
Activate Bluetooth on your device (see
chapter 4 "Preparing the measurement", Blue-
®
tooth ).
Step 2: "HealthCoach" app
In the HealthCoach app, add the SBC 53 under
"Settings/My devices".
Step 3: SBC 53
take a measurement.