Sanitas SBC 53 Mode D'emploi page 31

• To view the measurement data for user
memory , press the M2 memory button.
The average of all measurements appears
on the display.
®
If Bluetooth is activated (the
flashes on the display), the blood pressure
monitor attempts to connect to the app. If
you press the M1 button in the meantime,
the transfer is cancelled and the average
values for morning measurements are
displayed. If you press the M2 button, the
transfer is cancelled and the measurement
data of user memory
symbol is no longer shown. The buttons
are deactivated as soon as a connection is
established and the data is transferred.
symbol
is displayed. The
Press the M1 button if you have selected
user memory 1.
Press the M2 memory button if you have
selected user memory 2.
A flashes on the display.
The average value of all saved measured
values in this user memory is displayed.
• Press the relevant memory button (M1 or M2).
AM flashes on the display.
The average value of the morning measure-
ments for the last 7 days is displayed (morn-
ing: 5.00 a.m. – 9.00 a.m.).
Press the relevant memory button (M1 or M2).
PM flashes on the display.
The average value of the evening meas-
urements for the last 7 days is displayed
(evening: 6.00 p.m. – 8.00 p.m.).
31