Britax EMBLEM ALLEGIANCE Guide D'utilisation page 17

6� Attach the tether to a
7� Wrap excess webbing in
for
Forward-Facing Installation with LUAS
9 All connections are secure and straps are not twisted�
9 Car seat base MUST be flat on vehicle seat and MUST be
9 No more than 7�5 cm (3 in�) of the base hangs over the
9 The child seat cannot be moved front to back or side to
9 Any excess tether webbing is contained within your
9 The anti-rebound bar is removed�
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 15 14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 15
EMBLEM/ALLEGIANCE Canadian User Guide
designated anchor (see
vehicle owner's manual)
and remove slack (see
page 29)�
the elastic strap and store
in tether storage pouch�
parallel to vehicle seat�
edge of the vehicle seat�
side more than 2�5 cm (1 in�) at the belt path� If the child
seat is not secure, repeat installation or use a different
seating location�
vehicle and secured in the elastic strap�
15
11/16/23 10:47 AM 11/16/23 10:47 AM