Publicité
Les langues disponibles
Les langues disponibles
BRITAX Child Safety, Inc.
Lap-Shoulder Belt Installation
1� Loosen the harness�
2� The anti-rebound bar is
3� Recline the unoccupied
4� Pull the head restraint/
5� If applicable, open the
6� Route the vehicle belt
7� Buckle the seat belt�
10
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 10
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 10
a� Lift harness adjuster
lever and pull both
harness straps
forward�
b� Remove the infant
positioning pillow
and unbuckle the
harness�
required for rear facing
installations� Attach the
anti-rebound bar (see
page 26)�
IMPORTANT:
Keep
fingers away from the anti-
rebound bar connection
points to avoid finger
entrapment or pinching�
child seat to position 3
and place rear-facing on
the vehicle seat (see page
24)� Ensure that no more
than 7�5 cm (3 in�) of the
base hangs over the edge
of the vehicle seat�
head pad cover up,
then pull the seat cover
forward to access the
rear-facing belt path�
blue lock-off closest to
where the vehicle belt will
be buckled (see page 24)�
a� Open the locking tab�
b� Open the clamp�
through the rear-facing
belt slots�
NOTE: Ensure the vehicle
belt is not twisted.
5b
5a
Locking
Tab
7�5 cm
Clamp
11/16/23 10:47 AM
11/16/23 10:47 AM
9
9
9
9
9
9
Publicité
