Britax EMBLEM ALLEGIANCE Guide D'utilisation page 14

BRITAX Child Safety, Inc.
Lap Belt Installation
1� Loosen the harness�
2� The anti-rebound bar is
3� Recline the unoccupied
4� Pull the head restraint/
5� Route the vehicle belt
6� Buckle the seat belt�
12
14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 12 14878600_A-1_USER GUIDE, EMBLEM ALLEGIANCE, CAN_BOOK.indb 12
a� Lift harness adjuster
lever and pull both
harness straps
forward�
b� Remove the infant
positioning pillow
and unbuckle the
harness�
required for rear facing
installations� Attach the
anti-rebound bar (see
page 26)�
IMPORTANT: Keep
fingers away from the anti-
rebound bar connection
points to avoid finger
entrapment or pinching�
child seat to position 3
and place rear-facing on
the vehicle seat (see page
24)� Ensure that no more
than 7�5 cm (3 in�) of the
base hangs over the edge
of the vehicle seat�
head pad cover up,
then pull the seat cover
forward to access the
rear-facing belt path�
through the rear-facing
belt slots�
IMPORTANT: Do not
use lock-offs for lap belt
installations�
NOTE: Ensure the vehicle
belt is not twisted.
7�5 cm
11/16/23 10:47 AM 11/16/23 10:47 AM