clage MBH 3 7 Serie Mode D'emploi page 20

Description of appliance
1. Description of appliance
This instantaneous water heater is intended to provide the economical heating of water sufficient for a single out-
let, i.e. handwash basin, and is installed together with a sanitary water fitting.
When the hot water tap is opened, the instantaneous water heater switches itself on auto matically and heats
the water as it passes through the appliance. It is only then that the appliance uses electricity. The temperature
increase depends on the flow rate.
1.1 Technical specifications
Type
Energy efficiency class
Capacity
Rated Pressure
Connecting type
Heating system
Min. water resistance at 15 °C
Max. water inlet temperature
Rated voltage
Rated power
Rated current
Required min. cable cross-section
Hot water output at ∆t = 25 K
2)
Switching on at
Switching off at
Approx. weight when filled with water
Protection class
Marking / Approvals
*) The declaration complies with the EU regulation No 812/2013.
1) The specific resistance can be asked for at your water distribution company.
2) Temperature increase from e. g. 15 °C to 40 °C.
Litre
MPa (bar)
Ωcm
1)
°C
kW
A
mm 2
l/min
l/min
l/min
kg
MBH 3 MBH 4
pressure-resistant / pressureless
Bare wire heating system IES
1~ / N / PE 230 V AC
3.5 4.4
15.2 19.1
1.5 2.5
2.0 2.5
1.3 1.8
1.0 1.4
see rating plate
19
MBH 6 MBH 7
A
*)
0.2
1 (10)
®
1100
20
2~ / PE 400 V AC
5.7 6.5
24.8 16.3
4.0 1.5
3.3 3.7
2.2 2.4
1.7 2.0
1.5
IP 25
CLAGE
EN