SilverCrest SMK 1000 B2 Mode D'emploi page 26

Blending
If you want to blend soups or shakes for a short
time, you can the BLEND function
1) Add the food to be blended into the blender
jug 5 if it is not already in there. Ensure that
the blender jug 5 is filled to at least the MIN -
1300 ml marking, but not higher than the MAX
- 1600 ml marking.
2) Place the lid 8 on the blender jug 5. Ensure
that the contact plug 1 in the lid 8 fits cor-
rectly into the safety socket 2.
3) Insert the connector 3 into the built-in plug 4
on the appliance.
4) Insert the plug into a mains power socket. You
will hear a beep and the programme indicators
will flash.
5) Press the MODE button 0 repeatedly until the
BLEND programme indicator
flash.
6) Press and hold the START/STOP button u
for as long as the contents of the blender jug
5 is to be blended, but not longer than 20
seconds. As soon as you let go of the START/
STOP button u, the blending process stops.
The blending process stops automatically after
20 seconds.
SMK 1000 B2
Safety appliances
Overheating protection
t.
This appliance is fitted with overheating protection
to protect the motor from overheating.
If the overheating protection is triggered, the motor
stops and the appliance switches itself off. It cannot
be switched back on until it has cooled down.
This can happen if:
–
–
■ If the overheating protection is triggered and the
appliance stops, pull the plug out of the socket
t starts to and wait around 5 minute until the appliance
stops. After it has cooled down, you can use the
appliance again.
Overfilling and overflow sensor
This appliance is fitted with a sensor 7 that recog-
nises when the apparatus is overfilled or threatens
to overflow.
If the appliance is overfilled, the appliance will not
start and you will hear a beep. In this case, reduce
the amount of liquid. Always pay attention to the
MAX - 1600 ml and MIN - 1300 ml markings on
the blender jug 5!
If the appliance threatens to overflow during a
cooking or blending process, the appliance will
switch off and starts to beep. Reduce the amount
of liquid and restart the appliance.
You have used the BLEND function
several times in quick succession for a total
of more than 20 seconds.
Several cooking processes have been start-
ed in direct succession without allowing the
appliance to cool down.
t
GB │ IE │ 23 ■