Mounting Tube-Type Tires; Inflating Tube-Type Tires - Hofmann monty 3550 Notice D'utilisation

38
monty 3550 / 3550AIR
5.1-1
5.1-2
5.1-3
5.2-1

5.1 Mounting tube-type tires

A. Proceed as described in section 4.2.A.
Do NOT lubricate the tube. Talc can be used to assist
with the tube positioning.
B. Mount the valve core and place the tube onto the tire
to confirm that the tube is of the correct size (Fig. 5.1-1).
C. Inflate the tube slightly: if held with the index finger it
should bend a little (Fig. 5.1-2).
341.tif
D. Mount the first bead as described in section 4.2.B.
Put the tube inside the tire and secure the valve with the
chuck of the inflating hose (Fig. 5.1-3).
Mount the top bead following the directions above.

5.2 Inflating tube-type tires

To inflate the tires unlock the rim and start inflating while
pressing the valve towards the inside. This is necessary
to avoid air pockets forming between tube and tire (Fig.
5.2-1).
Ensure that the tire is correctly centered on the rim and
complete inflation as described in section 4.3.
342.tif
343.tif
537.tif
USA - CANADA