Parkside PLS 48 D2 Mode D'emploi page 29

used soft solder .
Level 3: Approx . 300 °C Normal operation, e .g . when using
lead-free solder .
Level 4: Approx . 400 °C high soldering temperature, e .g . for
removing solder from small solder joints .
Level 5: Approx . 500 °C high soldering temperature, e .g . for
removing solder from larger solder joints .
Switching off
NOTE
Always place the soldering iron
f
u
spring
.
Press the ON / OFF switch
„
use, remove the plug from the mains socket .
Solder sponge
CAUTION
The hot soldering tip
f
dry solder sponge
damaged .
NOTE
The soldering sponge serves to clean the soldering tip .
f
Moisten the soldering sponge before using it .
f
26
| GB | IE
n
r
to the position "0" . When not in
t
must never come into contact with a
. Otherwise, the solder sponge may be
s
after use back in the coil
PLS 48 D2