Parkside PLS 48 D2 Mode D'emploi page 25

During work breaks, the soldering iron must be
„
placed in the multifunctional holder and the device
must be disconnected from the power source .
Keep the device away from inflammable material .
„
Do not apply excessive pressure to the tips during
„
use . When pressure is applied, the thin tips may
bend .
A fire can be started if the device is not carefully
„
handled .
Never leave the device unattended when switched
„
on .
CAUTION! RISK OF INJURY! Keep your hands
„
away from the heated workpiece . Heat can be
released through the workpiece .
Avoid contact of the hot soldering tip with the plastic
„
parts of the multifunctional holder . Otherwise this
may result in damage to the device .
In case of danger, immediately remove the plug
„
from the mains socket .
CAUTION! RISK OF POISONING! Do not breathe
„
fumes .
In the case of working for prolonged periods,
„
in which hazardous fumes may arise, always
ensure adequate ventilation of the workplace . It is
recommended to wear protective clothing such as
protective gloves, mouth protection and a working
22
| GB | IE
PLS 48 D2