Parkside PAAP12A1 Traduction Des Instructions D'origine page 23

CORDLESS POLISHER
PAAP 12 A1
Introduction
Congratulations on the purchase of your new
appliance. You have chosen a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all of the operating and
safety instructions. Use the product only as described
and for the range of applications specified. Please
also pass these operating instructions on to any
future owner.
Intended use
The appliance is designed for polishing or sanding
lacquers, coatings, plastics and other smooth
surfaces. Any other usage or modification of the
appliance is deemed to be improper and carries
a significant risk of accidents. The manu facturer
accepts no responsibility for damage(s) resulting
from improper usage. This appliance is intended
for domestic use only.
Features
Speed selector switch
Battery LED (charge level indicator)
Safety lock-out
Release button for the battery pack
Battery pack*
ON/OFF switch
Polishing disc
Thread
Spindle lock
Fig. A
Additional handle
Polishing hood, orange
Polishing hood, black
Fake fur attachment
Sandpaper
│ GB │ IE
■ 18
Fig. B
Red charge control LED
Green charge control LED
High-speed charger*
Package contents
1 cordless polisher
1 polishing disc Ø 75 mm (with Velcro fastener)
1 polishing hood, orange (for pre-polishing)
1 polishing hood, black (for final polishing)
1 fake fur attachment
5 75 mm sandpaper
1 additional handle
1 set of operating instructions
Technical specifications
Cordless polisher PAAP 12 A1:
Rated voltage:
Rated speed, 1st gear: n 0–2800 rpm
Rated speed, 2nd gear: n 0–8300 rpm
Polishing disc:
Thread:
Battery pack: PAPK 12 A2*:
Type:
Rated voltage:
Cells:
Capacity:
High-speed battery charger: PLGK 12 A1*
INPUT:
Rated voltage:
Rated power
consumption:
Fuse (internal):
OUTPUT:
Rated voltage:
Rated current:
Charging time:
Protection class:
* BATTERY AND CHARGER ARE NOT INCLUDED
(DC)
12 V
Ø 75 mm
M6
LITHIUM ION
(DC)
12 V
3
2000 mAh/24 Wh
220–240 V ~ , 50–60 Hz
(AC)
50 W
T2A
2 A
(DC)
12 V
2400 mA
approx. 60 min
II / (double insulation)
PAAP 12 A1