Publicité
Les langues disponibles
Les langues disponibles
Smart/auto cleaning
The robot vacuum cleaner will start with automatic
cleaning. During the cleaning process, it recognises
the places it has not yet cleaned, then carries out
extra cleaning automatically at a later point in time
with even higher levels of cleaning efficiency.
Select the corresponding function in the app to
start automatic cleaning.
Spot mode
This mode is suitable for very dirty or very dusty ar-
eas. In spot cleaning mode, the product will focus on
one area to clean.
Select the corresponding function in the app to
start this mode.
40 GB/IE
Note: Spot mode will end automatically, and the
robot vacuum cleaner enters standby mode.
Home mode
Use this mode to return the product to the suction
station
.
14
Note: The robot vacuum cleaner automatically re-
turns to the suction station
Select the corresponding function in the app
so that the robot vacuum cleaner returns to the
suction station
.
14
Use the suction function
If the robot vacuum cleaner is connected to the
suction station
then the charging process starts
14
immediately. After 3 seconds, the suction station
sucks out dust from the robot vacuum cleaner for
15 seconds. During this process, the operating con-
trol light
flashes orange.
21
Note: Dust extraction is then carried out after the
robot vacuum cleaner has vacuumed for at least
10 minutes in auto mode and no other settings have
been set in the app regarding the suction function.
If you have selected another setting then dust extrac-
tion will start accordingly.
when the battery is low.
14
14
Publicité
