Publicité
Les langues disponibles
Les langues disponibles
Maps: You can check or delete the maps saved
in the robot vacuum cleaner. Up to 3 maps can be
saved at the same time.
Search for robot: The robot vacuum cleaner
emits a beep for 10 seconds.
Schedule: see "Schedule"
Carpet recognition: When activated, the robot
vacuum cleaner automatically increases the suction
power on carpets.
Suction station: At this point you can set the fre-
quency of which the robot vacuum cleaner is emptied
by the suction station
14
robot vacuum.
Notifications: You can turn notifications on or
off about the robot status, cleaning reminders or
similar here.
Suction power:
Select the suction power:
1. ECO: Low suction power and low energy
consumption
2. Normal: Default suction power - ideal
combination of running time and suction power
3. MAX: Maximum suction power for stub-
born dirt
Continue from the stopping point:
1. activated: If the robot vacuum cleaner has
to go to the suction station with charging dock
during operation, then after charging, it
14
continues vacuuming from the point at which
vacuuming was interrupted.
2. deactivated: If the robot vacuum cleaner
has to go to the suction station with charging
dock
during operation, then after charging,
14
it waits there until it is reactivated.
Volume: Set the signal volume for the robot
vacuum cleaner. This has no effect on cleaning-
related noises.
Records: You can see the vacuum cleaner's
records here.
The records of vacuuming are listed with the date
and start time. You can see more information by
tapping the date in question. The robot vacuum
cleaner logs the area that was cleaned and the
length of time taken. Furthermore, you can also
see a map of the cleaned area so that you can
36 GB/IE
and manually clean up the
trace the route taken by the vacuum cleaner.
You can delete individual records in the list view
by swiping left and then tapping "Delete".
Spare parts:
Side brushes: Shows the estimated life of the side
brushes
. Reset these after replacement is complete.
7
Main brush: Shows the estimated life of the main
brush
. Reset these after replacement is complete.
3
Filter: Shows the estimated life of the filter. Reset
these after replacement is complete.
Create schedule
You can set a schedule so that the robot
vacuum cleaner carries out its work auto-
matically:
Tap "Schedule".
Select a day of the week.
Adjust the time.
If managing several days:
Tap "Repeat".
Select day(s) of the week.
Selected days of the week are labelled with a
tick. To deselect a selected day of the week,
simply tap it once again.
Then confirm the schedule that has been created:
Tap "Back".
Tap "Confirm".
Set advanced settings
Tap the pencil symbol in the control panel
to get to the advanced features:
Customise the product:
1. Tap the pencil in the advanced settings.
2. Tap the symbol and take a photo or select
one from the album in the mobile device.
Permission for access to the camera and/or
the photo archive is required to do this.
3. Tap "Name" to rename the product.
4. Tap "Location" to assign the product to a room.
Publicité
