Publicité
Les langues disponibles
Les langues disponibles
Tap the "Device information" tab to see infor-
mation about your product:
1. Virtual ID
2. IP address
3. Time zone of the product
4. WiFi signal strength
Tap the "Tap for performance and automation"
to see the smart features and automation within
the product.
The "Offline notification" controller is used to
decide whether the robot vacuum cleaner
sends a notification if it is offline for more than
30 minutes.
Position 1 ON: Notification is sent
Position 2 OFF: Notification is not sent
You can share access to the robot vacuum
cleaner with other Lidl Home app users via the
"Offline notification" tab.
Use the "Create group" tab to add the robot
vacuum cleaner to a group so that all products
within this group can be controlled synchronously.
1. Tap "Create group".
2. Select products (selected products are labelled
with a tick).
3. Tap "Save" in the top right-hand corner.
4. Name the group.
5. Tap "Save".
The group is now shown on the home screen.
Tap "FAQ" to see questions that are frequently
asked about the product.
Tap "Check for firmware upgrade" and the
robot vacuum cleaner checks to see if a new
version of the firmware is available.
Tap "Remove device" to remove the product
from the app. There are 2 options available:
1. "Disconnect": The product is removed
from the app. The data remains in the robot
vacuum cleaner's memory. This process only
puts the product back into offline mode and
starts pairing mode.
2. "Disconnect and delete all data":
The product is reset to factory settings. All
data is deleted from the product and the cloud
using this function. Use this function before
giving the product to others, before disposing
of it, or sending it back to the manufacturer.
Ensure that all data has been deleted from
the device and also from the cloud.
Follow the instructions in the app or tap "Cancel"
so that the device is not removed.
Note: The privacy policy can be accessed in the
Lidl Home app under Privacy in the "ME" tab.
Note: What data is processed by the robot vacuum
cleaner? A map is created for precise laser navigation,
which is saved in both the robot vacuum cleaner and
the cloud until it is manually deleted.
Note: If you no longer wish to use the robot vacuum
cleaner or want to delete the maps from the cloud or
the vacuum cleaner, you can go to "Settings/maps/
individual maps" to delete one or to "Advanced
tools/remove device"/"disconnect and delete" to
delete all maps. By holding down the
button
and the
"home mode" button
9
robot vacuum cleaner, the vacuum cleaner is only
set in pairing mode whilst the data stored on the
device is still saved.
Note: At least one stored map is required to use
all the features of the robot vacuum cleaner.
Note: During the vacuum process in the "Smart",
"Spot", "Area" and "Room" modes, the robot vac-
uum cleaner records the route taken, the start time
and the finish time of vacuuming. This data is collected
for the live illustration of the map as well as the re-
cordings. Records are saved for 60 days so that a
clear representation of previous use can be shown.
Note: To restore the factory settings of
the product:
Open the LIDL Home app and select the
"Home" tab.
Select the device and tap the pencil icon in the
top right-hand corner.
Tap "Remove device", then "Disconnect and
delete data".
After tapping "Confirm" the factory settings of
the product will be restored and your data will
be deleted.
Note: An update of the firmware can lead to
changes to the functions on the app.
An updated set of operating instructions
can be found here: "Me" tab
Tap "Operating Instructions".
On/Off
on the
10
GB/IE
37
Publicité
