yyyywwxxxxx
Note:
Other symbols/decals on the product refer to
certification requirements for some markets.
Symbols on the battery and/or on the
battery charger
Fail-safe transformer.
Safety definitions
The definitions below give the level of severity for each
signal word.
WARNING:
CAUTION:
Note:
This information makes the product easier to
use.
General machine safety warnings
WARNING:
instructions, illustrations and specifications
provided with this machine. Failure to follow
all instructions listed below may result in
electric shock, fire and/or serious injury.
4
This saw should only be
used by persons who are
specially trained in tree
maintenance work. See
operator's manual!
The rating plate shows se-
rial number. yyyy is the
production year, ww is the
production week.
Recycle this product at a recy-
cling station for electrical and
electronic equipment. (Applies
to Europe only)
Injury to persons.
Damage to the product.
Read all safety warnings,
Use and keep the battery charger indoors
only.
Double insulation.
California Proposition 65
Safety
•
Save all warnings and instructions for future
reference. The term "machine" in the warnings refers
to your mains-operated (corded) machine or battery-
operated (cordless) machine.
Work area safety
•
Keep work area clean and well lit. Cluttered or dark
areas invite accidents.
•
Do not operate machines in explosive atmospheres,
such as in the presence of flammable liquids, gases
or dust.Machines create sparks which may ignite the
dust or fumes.
•
Keep children and bystanders away while operating
a machine. Distractions can cause you to lose
control.
Electrical safety
•
Machine plugs must match the outlet. Never modify
the plug in any way. Do not use any adapter plugs
with earthed (grounded) machines. Unmodified plugs
and matching outlets will reduce risk of electric
shock.
•
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
959 - 011 - 07.06.2024