Husqvarna T535i XP Manuel D'utilisation page 28

Kickback information
The guide bar nose radius is determined by either the
maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius,
you may use a guide bar with smaller nose radius
Guide bar
Length, in Chain pitch, in
10 0.325
12
14
Filing equipment and filing angles
Using Husqvarna file gauge will give you the correct
filing angles. We recommend you to always use a
Husqvarna file gauge to restore the sharpness of the
5/32 in / 4.0
SP21G
mm
Approved batteries for the product
Battery
Type
Battery capacity, Ah
Nominal voltage, V
Weight, lb/kg
Approved battery chargers for the product
Battery charger
Mains voltage, V
28
Gauge, in
0.043
60° 30°
BLi200/BLi200X
Lithium-ion
5.2
36
2.9/1.3
than in our list. For guide bars of the same length, all
sprocket-nose guide bars of the same pitch and having
the same number of sprocket teeth may be considered
to have equivalent kickback energy.
The following cutting equipment is approved for the
models Husqvarna T535i XP.
Saw chain
Max. nose radius Type
8T Husqvarna
SP21G
saw chain. The part numbers are given in the table
below.
If you do not know which saw chain you have on your
product, turn to your servicing dealer.
0.025 in /
0°
0.65 mm
40-B220X
Lithium-ion
6
36
3.0/1.4
QC330
100-240
Length, drive
links (no.)
46
51
59
US: 595 00 US: 592 00
46-02 47-02
959 - 011 - 07.06.2024