Husqvarna T540i XP Manuel D'utilisation page 18

WARNING:
chain brake before you let the product
hang from a strop.
To remove a trapped product
1. Stop the product.
2. Attach the product safely to the tree inboard, against
the trunk side, of the cut or a different tool line.
3. Carefully pull the saw away from the kerf while you
lift the branch as necessary.
Introduction
WARNING:
safety chapter before you do maintenance
on the product.
Maintenance schedule
WARNING:
you do maintenance.
18
You must engage the
Maintenance
Read and understand the
Remove the battery before
WARNING:
product free. Risk of serious injury.
4. If it is necessary, use a hand saw or a second
chainsaw to release the product. Cut the branch at
a minimum of 30 cm/12 in from the caught product.
Make the cut on the outer end from where the
product is caught.
The following is a list of the maintenance steps that you
must do on the product. See
for more information.
Do not try to pull the
Maintenance on page 18
1036 - 012 - 09.05.2024