Bosch 4 Serie Manuel D'utilisation page 25

The following factors can falsify the
measuring result:
¡ Work surface not stable, even, clean and
smooth.
¡ Work surface vibrating
¡ The feet are not all touching the work
surface or are soiled.
¡ Objects underneath the main unit
¡ Objects on the main unit
¡ Main unit slipped
¡ Main unit touched
¡ Ingredient quantities less than 5 g or
0.01 lb
Weighing ingredients
Requirements
¡ The bowl is inserted or an accessory is
fitted.
¡ The rotary switch is set to
Press and do not touch the appliance
1.
again.
a The scales will be calibrated.
a The display shows "- - - -".
Wait for calibration to finish.
2.
a The display shows "0 g" or "0.00 lb".
Add the required ingredient.
3.
a The display shows the weight.
To weigh further ingredients, select one
4.
of the following options:
Add further ingredients and read off
‒
the total weight.
Press and wait until the display
‒
shows "0 g" or "0.00 lb".
To switch off the scales, press
5.
processing.
Tip: Also use the scales together with the
accessory. Weigh the ingredients directly
when adding them, e.g. to the blender at-
tachment or the ice maker.
Note: The scales switch off automatically
after approx. 3 minutes of inactivity.
Changing the display units of the
scales
Requirements
¡ The rotary switch is set to
¡ The scales are switched on.
To change the display unit between
1.
grams and pounds, press
hold briefly.
Release both buttons.
2.
a The scales self-calibrate and restart with
the changed setting.
a The setting is saved.
Timer
Timer
The timer shows the processing time.
Timer
Resetting the timer
Set the rotary switch to the required
1.
speed.
a The display shows the processing time.
To reset the display to "00:00" press
2.
Notes
¡ If you interrupt processing for less than
⁠ .
30 seconds, the last values displayed
are saved and will resume if processing
starts again.
¡ If you interrupt processing for more than
30 seconds, the appliance will switch on
the scales and perform calibration.
cleaning of Overview
Overview of cleaning
Clean all parts immediately after use so that
cleaning of Overview
residues do not dry on.
▶ Do not use cleaning agents containing
alcohol or spirits.
▶ Do not use sharp, pointed or metal ob-
jects.
▶ Do not use abrasive cloths or cleaning
agents.
▶ Only clean the control panel and the dis-
or start
play using a damp microfibre cloth.
Tip: When processing food such as carrots,
plastic parts may become discoloured. Re-
move discolouration with a soft cloth and a
few drops of cooking oil.
Clean the individual parts as indicated in
the table.
→ Fig.
⁠ .
28
Timer en
and and
⁠ .
25