en Scales
Preparing the appliance
Press the release button and raise the
1.
swivel arm until it engages.
6
→ Fig.
Place the bowl in the main unit.
2.
7
→ Fig.
Use the recesses on the main unit.
Turn the bowl anticlockwise until it en-
3.
gages.
→ Fig.
8
Press the tool into the main drive until it
4.
engages.
9
→ Fig.
To insert the kneading hook:
5.
Insert the kneading hook with the pro-
‒
tective cap fitted in the main drive.
Turn the protective cap until the
‒
kneading hook engages fully.
10
→ Fig.
The protective cap
main drive completely.
Add the ingredients to the bowl.
6.
11
→ Fig.
Press the release button and push the
7.
swivel arm down but not fully down.
→ Fig.
12
Hold the swivel arm in a slightly open po-
sition.
Lift the lid slightly at the front, slide fully
8.
onto the bowl and set down.
→ Fig.
13
9.
Push the swivel arm down until it en-
gages.
→ Fig.
14
Processing ingredients with tools
Insert mains plug.
1.
Set the rotary switch to the required
2.
speed.
→ Fig.
15
24
must cover the
To process the ingredients at maximum
3.
speed for a short time, set the rotary
switch to
and hold for the desired pro-
cessing time.
16
→ Fig.
If wished, further ingredients can be ad-
4.
ded during processing using the filling
shaft.
→ Fig.
17
To add greater quantities of ingredients:
5.
Turn the rotary switch to
‒
wait for the appliance to come to a
standstill.
Lift the swivel arm slightly and pull out
‒
the lid.
Add the ingredients to the bowl.
‒
Fit the lid and push the swivel arm
‒
down until it engages.
6.
Process the ingredients until you achieve
the required result.
Set the rotary switch to
7.
→ Fig.
18
Wait until the appliance stops.
a Processing stops and the drives move to
the parked position.
Finishing processing
19
23
→ Fig.
-
Using accessory drives
Notes
¡ Remove the cover to use accessories on
drive 2 or 3.
¡ Always close unused drives with the pro-
tective covers.
¡ Please follow the instructions for the ac-
cessory.
24
27
→ Fig.
-
Scales
Scales
Your appliance is equipped with a set of
Scales
scales. You can weigh ingredients individu-
ally.
The main unit has 4 weight sensors in its
feet.
and
.