32 | English
Line laser
Recommended ambient temperature during charging
Permitted ambient temperature during storage
Power supply
Output voltage
Minimum output current
A) The working range may be reduced by unfavourable environmental conditions (e.g. direct sun-
light).
B) Applies to the four horizontal intersection points
C) The values stated presuppose normal to favourable environmental conditions (e.g. no vibration,
no fog, no smoke, no direct sunlight). Extreme fluctuations in temperature can cause deviations
in accuracy.
D) An additional deviation of ±0.1 mm/m must be taken into account when at maximum self-level-
ling range.
E) Only non-conductive deposits occur, whereby occasional temporary conductivity caused by
condensation is expected.
F) Weight without lithium-ion battery pack/battery adapter/batteries
The serial number (12) on the type plate is used to clearly identify your measuring tool.
Measuring Tool Power Supply
The measuring tool can be operated either with a Bosch lithium-ion battery pack (9) or
with conventional non-rechargeable batteries in the battery adapter (8).
Note: Never store the measuring tool without an inserted lithium-ion battery pack (9) or
battery adapter (8), particularly in dusty or humid environments.
Operation with Non-Rechargeable Batteries (accessory)
It is recommended that you use alkaline manganese batteries to operate the measuring
tool.
Put the non-rechargeable batteries into the battery adapter (8). When inserting the non-
rechargeable batteries, ensure that the polarity is correct according to the illustration on
the inside of the battery adapter.
Always replace all the batteries at the same time. Only use batteries from the same man-
ufacturer and which have the same capacity.
Put the battery adapter (8) in the measuring tool and turn the rotary lock (7) so that you
can push down the square eyelet on the battery adapter.
1 609 92A 9B3 | (08.05.2024)
GLL 80-33 G
+10 °C to +35 °C
–10 °C to +45 °C
5.0 V
2 A
Bosch Power Tools