Publicité
Les langues disponibles
Les langues disponibles
PREPARATION
• Dress appropriately when operating the tiller. Always wear sturdy footwear. Never wear
• Do not allow children to operate this rototiller. Keep small children away from the area being tilled. Do not
sandals, sneakers, or open shoes, and never operate the tiller with bare feet. Do not wear
allow adults to operate the tiller without proper instruction.
loose clothing that might get caught in moving parts.
• Carefully inspect the area to be tilled and remove all foreign objects. Do not till above
PREPARATION
underground water lines, gas lines, electric cables, or pipes. Do not operate the tiller in soil
with large rocks and foreign objects which can damage the equipment.
• Dress appropriately when operating the tiller. Always wear sturdy footwear. Never wear sandals, sneakers,
or open shoes, and never operate the tiller with bare feet. Do not wear loose clothing that might get
• Disengage all clutches and leave all control levers in the neutral position before starting
caught in moving parts.
the engine.
• Carefully inspect the area to be tilled and remove all foreign objects. Do not till above underground water
lines, gas lines, electric cables, or pipes. Do not operate the tiller in soil with large rocks and foreign objects
• Handle fuel with care; it is highly flammable.
which can damage the equipment.
a. Use an approved fuel container.
• Disengage all clutches and leave all control levers in the neutral position before starting the engine.
• Handle fuel with care; it is highly flammable.
b. Never add fuel to a running engine or hot engine.
• Use an approved fuel container.
c. Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.
• Never add fuel to a running engine or hot engine.
d. Replace gasoline cap securely and clean up spilled fuel before restarting.
• Fill fuel tank outdoors with extreme care. Never fill fuel tank indoors.
• Replace gasoline cap securely and clean up spilled fuel before restarting.
• Never attempt to make any adjustments while the engine is running.
• Never attempt to make any adjustments while the engine is running.
OPERATION
OPERATION
• Never operate the tiller without guards, covers, and hoods in place.
• Never start the engine or operate the tiller with the wheels in the free-wheel position.
• Never operate the tiller without guards, covers, and hoods in place.
Make sure the wheel lock pins are engaged through the wheel hubs and wheel axle. The
• Never start the engine or operate the tiller with the wheels in the free-wheel position.
wheels act as a brake to keep the tiller at a controlled speed. Disengage wheel lock pins to
Make sure the wheel lock pins are engaged through the wheel hubs and wheel axle. The wheels act as a
permit free-wheeling only when engine is stopped.
brake to keep the tiller at a controlled speed. Disengage wheel lock pins to permit free-wheeling only when
engine is stopped.
• Keep hands, feet, and clothing away from rotating parts. Keep clear of tiller tines at all
• Keep hands, feet, and clothing away from rotating parts. Keep clear of tiller tines at all times.
times.
• Tines and wheels rotate when tiller is engaged in forward or reverse-- in forward, tines and wheels rotate
when the drive safety control lever (FORWARD), is pushed down toward the handlebar. In reverse, wheels
• Tines and wheels rotate when tiller is engaged in forward or reverse-- in forward, tines
and tines rotate when the drive safety control lever (REVERSE), is pulled back toward the operator.
and wheels rotate when the drive safety control lever(FORWARD), is pushed down toward
Releasing the reverse handle to the neutral position stops the wheels and tines. Do not operate both drive
the handlebar. In reverse, wheels and tines rotate when the drive safety control
safety control levers at the same time.
lever(REVERSE), is pulled back toward the operator. Releasing the reverse handle to the
• Be extremely cautious when operating in reverse. Take extra care to avoid slipping or falling, and keep
hands and feet clear of tines.
neutral position stops the wheels and tines. Do not operate both drive safety control levers
• Use extreme caution when operating on or crossing gravel drives, walks, or roads. Stay alert for hidden
at the same time.
hazards or traffic.
• Be extremely cautious when
operating in reverse. Take extra care
to avoid slipping or falling, and keep
hands and feet clear of tines.
• Use extreme caution when operating
on or crossing gravel drives, walks, or
roads. Stay alert for hidden hazards or
traffic.
• After striking a foreign object, stop the engine, remove the wire from the spark plug, thoroughly inspect
the tiller for any damage, and repair the damage before restarting and operating the tiller.
• If vegetation clogs the tines, raise the handlebars to elevate the tines, and run the tiller in reverse. If this
does not clean clogged vegetation from the tines, STOP THE ENGINE AND DISCONNECT THE SPARK
PLUG WIRE before removing vegetation by hand.
• Engine muffler will be hot from operation. Do not touch it with bare skin or a severe burn may result.
• If the unit should start to vibrate abnormally, stop the engine and check immediately for the cause.
Vibration is generally a warning of trouble.
4
BE-BRTXXX USER MANUAL
Publicité
