MIRKA DEROS II Serie Instructions D'utilisation page 56

en (original)
Declaration of conformity
Mirka Ltd, 66850 Jeppo, Finland
declare under our sole responsibility that the Mirka® products (listed below and see "Technical data" table for particular model) to which
this declaration relates are in conformity with the following standards or other normative documents: EN 62841-1:2015+A11:2022, EN
62841-2-4:2014, EN IEC 55014-1:2021, EN IEC 55014-2:2021, EN 61000-3-2:2014, EN 61000-3-3:2013, EN 300 328 V2.2.2, EN 301 489-1 V2.2.3,
EN 301 489-17 V3.2.4, EN IEC 63000:2018 in accordance with the regulations 2006/42/EC, 2011/65/EU, 2014/53/EU.
®
Products: Mirka DEROS II 325, 350, 550, 625, 650, 680 & 750
Jeppo 12.02.2024
Place and date of issue
Original instructions. We reserve the right to make changes to this manual without prior notice.
Important
Read these safety and operating instructions carefully before installing, operating or maintaining this tool. Keep these
instructions in a safe and accessible place. Read and comply with state and local regulations.
Required personal safety equipment
Read
operator's manual
Symbols
Complies with EU relevant standards
Complies with UK relevant regulations
Complies with Australia & New Zealand RCM requirement
Complies with Eurasian conformity requirements
Complies with Serbian conformity requirements
И005 24
Complies with Ukraine conformity requirements
Complies with Brazilian conformity requirements
Complies with China RoHS requirement
56
Mirka® DEROS II 325, 350, 550, 625, 650, 680 & 750
Company Stefan Sjöberg, CEO
Wear
safety glasses
Manufacturer / Supplier
Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
www.mirka.com
Wear
ear protection safety gloves
Wear Wear
face mask