GYS TITAN 321 DC TRI Mode D'emploi page 31

User manual
E-Weld
Down-slope current
Post-gas
Cold current
Pulse balance
PULSE Frequency
HotStart
ArcForce
Ampere (unit)
Time (unit)
Percentage (unit)
Volt (unit)
Hertz (unit)
KiloJoules (unit)
LOCK
JOB and return
TIG process
MMA process
Standard mode
Pulse Mode
Spot Mode
Tack Mode
Multi Spot Mode
Multi Tack Mode
HF ignition
LIFT ignition
Touch HF ignition
2T
4T
4T LOG
Gas purge
Translation of the original
instructions
x
x
x
x x
x
x x
x
x
x x
x x
x x
x x
x x
x x
x x
x x
x
x
x x
x x
x
x
+ x
x
+
x
x
+
x
x
x
+
x
Continuous energy welding mode with compensation for arc length variations.
Down-slope current.
Duration of the gas protection after the arc is extinguished. It protects the weld
pool and the electrode against oxidisation when the metal is cooling down (sec).
Second «cold» welding current in TIG Standard, 4TLOG, TIG Pulse and MMA
Pulse (%).
Balance between the cold current duration and pulse duration (%).
Frequency of the Pulse in Pulse mode (Hz).
Adjustable overcurrent at the beginning of the welding (%)
Overcurrent delivered during welding (-10 to +10).
Amperage unit for current adjustment and welding current display.
The unit of seconds for timing settings or the display of welding duration.
Unit of percentage for proportional settings.
Voltage unit for the display of the welding voltage.
Hertz unit for frequency settings.
Unit in KiloJoules for the welding energy display.
Lock/unlock button (press for 3 seconds).
Button to access the JOB menu (save and recall a program).
This button also returns to the previous screen.
Direct return mode (ready to weld)
• By pressing the trigger
• Long press on the navigation wheel
Arc welding with a non-melting tungsten electrode under protective gas shiel-
ding.
Arc welding with a consumable coated electrode
Smooth current
Pulsed current
Smooth tacks
Pulse + smooth tacking
Repeated smooth tacking
Repeated pulsed tacking
High-frequency ignition
Ignition with contact
Time-delayed high-frequency ignition
2T trigger mode.
4T trigger mode.
4T LOG trigger mode.
Gas purge activation button for the torch.
TITAN 231 DC FV / 321 DC TRI
31