Assembly - Tunturi C20 Mode D'emploi

on.warranty.terms.can.be.found.in.
the.warranty.booklet.included.with.the.
product.
•.Do.not.attempt.any.servicing.or.
adjustments.other.than.those.described.
in.this.guide..Everything.else.must.
be.left.to.someone.familiar.with.the.
maintenance.of.electromechanical.
equipments.and.authorised.under.the.
laws.of.the.country.in.question.to.carry.
out.maintenance.and.repair.work.
SAVE THIS INSTRUCTION MANUAL
WELCOME TO THE WORLD OF TUNTURI
EXERCISING!
Your choice shows that you really want to invest in
your well being and condition; it also shows you
really value high quality and style. With Tunturi
Fitness Equipment, you've chosen a high quality,
safe and motivating product as your training
partner. Whatever your goal in training, we are
certain this is the training equipment to get you
there. You'll find information about using your
exercise equipment and what makes for efficient
training at Tunturi's website at
WWW.TUNTURI.COM.

ASSEMBLY

Start by unpacking the equipment. Two people are
needed for the assembly. Check that you have the
following parts:
1. Frame
2. Front support
3. Rear support
4. Front frame tube
5. Arms (2)
6. Footrests (2)
7. Meter
8. Handlebar
9. Shaft
10. Transformer
11. Assembly kit (contents marked with * in the
spare part list): keep the assembly tools, as you may
need them e.g. for adjusting the equipment
If necessary, please contact your dealer with the
model, equipment serial no. and spare part no.
of the missing part. You'll find a spare part list at
the back of this guide. The packaging includes a
silicate bag for absorbing moisture during storage
and transportation. Please dispose of the bag once
you have unpacked the equipment. The directions
left, right, front and back are defined as seen from
the exercising position. Allow at least 100 cm of
clearance around the equipment.
REAR SUPPORT
Push the stand feet to the rear support ends and
attach the rear support to the main frame with two
bolts, washers and locking sleeves.
FRONT SUPPORT
Attach the front support with transportation
wheels to the main frame with two bolts, washers
and locking sleeves.
FOOTRESTS
Attach the footrests to the position of your choice
on the pedal shafts with two screws, two washers /
screw and locking nuts.
FRONT FRAME TUBE
Remove the rubber band from around meter cable
coming from the frame tube.
Attach the meter cable to the connector coming
from the front frame tube. Push the front frame
tube inside the frame tube: do not damage the
meter cable! Attach the front frame tube tight to
the frame with the washers and attachment screws.
O W N E R ' S M A N U A L
G B
3