Parkside PBSA 12 E4 Traduction Des Instructions D'origine page 20

GB MT
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are limiting the working
hours. For this purpose all parts of
the operating cycle have to be con-
sidered (for example, times when
the electric tool is switched off and
times when it is switched on but
running without any load).
Charging time
(min)
PLGK 12 A1
PLGK 12 A2
PLGK 12 B2
PDSLG 12 A1
Safety instructions
Ensure that the safety instructions are ob-
served when operating the appliance.
Symbols and icons
Symbols on the appliance:
Carefully read these operating in-
structions.
This device is part of the
X 12 V TEAM series
20
Charging time
The device is part of the X 12 V TEAM se-
ries and can be operated with batteries of
the X 12 V TEAM series.
Batteries of the X 12 V TEAM series may
only be charged using chargers of the
X 12 V TEAM series.
We recommend that you operate this appli-
ance with the following batteries only:
PAPK 12 A3, PAPK 12 B3, PAPK 12 D1.
We recommend charging these batteries
with the following chargers: PLGK 12 A2,
PLGK 12 B2, PDSLG 12 A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
PAPK 12 A1
PAPK 12 A2
PAPK 12 A3
60
60
30
60
Symbols on the drill set:
PAPK 12 B1
PAPK 12 B2
PAPK 12 B3
60 120
60 120
45 60
45 60
Electrical appliances must not be
disposed of with the domestic
waste.
Wear personal protective equip-
ment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
PAPK 12 D1
150
150
80
80