Publicité
Sterilization
Laboratory reactor compo-
NOTICE
nents may only be sterilised
using these methods
Chemical methods:
Germicidal solutions (formalin, phenol, alcohol etc.) are
good general-purpose desinfectants. It is important that
all disinfectant residues are then removed with sterilized
water.
Maintenance
Refer to the operating instru-
NOTICE
tions for individual compo-
nents.
The IKA laboratory reactor system requires little main-
tenance. The ball bearings are sealed and lubricated for
life.
When ordering spare parts, please give the manufacturing
number shown on the type olate, the machine type and the
name and item-no. of the spare part.
Before you send any equipment to us for repair, ensure that
it has been cleaned of any toxic or corrosive substances.
Use only water with a detergent additive containing a sur-
face active agent or, in cases of extreme contamination,
isopropyl alcohol for cleaning parts not in contact with the
medium.
Mixing
Tempering
22
Name
LR 2000.10
LR 2000.11
LR 2000.20
HBR 4 control
HBC 5 basic/control
HBC 10 basic/control
RC2 basic/control
H.SI.8
H.PUR.8.R
H.FKM.8
LT 5.20
LT 5.21
LT 5.25
LT 5.26
LT 5.27
LR 2000.60
PT 100.25
PT 100.30
H 68.55
Sterilization with moist heat:
This denotes the use of a steam jet pressurized to 2 bar at
120 °C.
Sterilization with hot air:
Hot-air sterilization is usually performed at 160 °C or
190 °C.
Repairs
Please only send devices in for repair that have been
cleaned and are free of materials which might pres-
ent health hazards.
For this, use the "certificate of compliance" form which
you can obtain from IKA or can download a version for
printing from the IKA website at www.ika.com.
If your device requires repair, return it in its original packag-
ing. Storage packaging is not sufficient when sending the
device - also use appropriate transport packaging.
Accessories
Designation
Anchor stirrer with scraper
Anchor stirrer with flow borings
Flow breaker
Heating bath
Circulation thermostat
Circulation thermostat
Chillier
Hose set for cooling
Hose set for cooling
Hose set for cooling
Metal hoses up to 300 °C
PTFE hoses -60 °C to 260 °C
Lock coupling
Lock coupling
Hose adapter
Temperature sensor holder
Temperature sensor
Temperature sensor
Temperature sensor
Remark
FPM - solvent-based
External measuring device
Ahlborn
Thermostat
Overhead stirrer
Publicité
